Fitting Guides

Vehicle Decal & Overlay Fitting Guide

Important: These decals, overlays, and custom vinyl products are made to order. Proper installation is essential for performance and longevity. Failure to follow these instructions may result in lifting, peeling, or damage and is not considered a manufacturing fault.

For full details, please refer to our Returns & Refunds Policy before attempting installation.

Union Jack Rear Quarter Window Decals

Your decals are supplied slightly larger than the window to allow positioning adjustments. Follow these steps carefully:

Preparation

  • Clean the window thoroughly and ensure it is completely dry.

  • Apply on a dry, mild day; vinyl does not adhere properly to cold or wet surfaces.

Application

  1. Position the decal in the desired location.

  2. Use a bank card or squeegee to press the decal from the centre outwards.

  3. Slowly remove the application tape, pressing again to ensure full adhesion.

  4. Trim excess vinyl using a Stanley blade or craft knife.

Troubleshooting

  • In cooler temperatures, vinyl may not stick immediately. Apply gentle heat (hair dryer recommended) to activate the adhesive.

  • Do not overheat; excessive heat may damage the decal.

Gel Badge Overlays

Preparation

  • Clean the badge surface thoroughly and ensure it is dry and free from wax or residue.

Application

  1. Carefully align the overlay before pressing it firmly.

  2. Apply gentle heat with a hair dryer if required to activate the adhesive.

  3. Press evenly across the overlay to ensure full adhesion.

⚠️ Do not overheat, as excessive heat may cause permanent damage to the gel overlay.

Ford Kuga Reflector (Honeycomb) Decals

Preparation

  • Clean the surface and remove any wax, polish, or cleaning products.

  • In colder weather, vinyl may be stiffer; apply minimal heat if necessary.

Application

  • Position carefully before securing.

  • Apply even pressure to prevent air bubbles or lifting.

  • Take your time to ensure precise alignment.

For a visual guide, watch the installation video:
https://tinyurl.com/3s4w9avm

Legal Disclaimer

  • Improper installation, incorrect surface preparation, or failure to follow this guide is not a manufacturing fault.

  • Claims for peeling, lifting, or failure of vinyl due to installation errors will not be accepted under our Returns & Refunds Policy.

  • Always refer to our Returns & Refunds Policy for full terms regarding faulty or damaged goods.

By installing any decal or overlay, you confirm that you understand and accept these terms.

Custom Clothing Care Guide

How to Keep Your Printed Garments Looking Their Best

All of our clothing is custom made to order using professional-grade print methods. Proper care is essential to maintain colour, print quality and garment lifespan.

Failure to follow these care instructions may result in premature cracking, peeling or fading.

Before First Wear

  • Do not wash for at least 24–48 hours after receiving your garment.

  • This allows the print to fully settle and cure.

Washing Instructions

  • Turn garment inside out before washing

  • Wash at 30°C (cold wash recommended)

  • Use a mild detergent

  • Wash with similar colours

  • Do not use bleach or harsh stain removers

Washing at high temperatures may damage the print.

Drying Instructions

  • Air dry only (recommended)

  • Do not tumble dry

  • Do not place directly on radiators

Excess heat is the main cause of print cracking and peeling.

Ironing Instructions

  • Never iron directly over the print

  • Turn garment inside out before ironing

  • Use low heat

  • Do not use steam directly on printed areas

Direct heat on print can permanently damage the design.

Storage

  • Store folded or hung in a cool, dry place

  • Avoid prolonged exposure to direct sunlight

What to Avoid

Do not:

  • Tumble dry

  • Dry clean

  • Use fabric softener excessively

  • Soak for long periods

  • Scrub directly over printed areas

Commercial & Workwear Use

If used for workwear or frequent washing:

  • Wash at lower temperatures where possible

  • Avoid industrial laundering unless specified

  • Follow care instructions strictly to extend print life

Important

Damage caused by incorrect washing, tumble drying, or ironing is not considered a manufacturing fault.

Proper care will significantly extend the life of your custom garment.